
                 Introductie nRF24L01(+)

De nRF24L01 is een zeer goedkope 2,4GHz zend/ontvanger 
voor 0,50 tot 0,90 per stuk. Een lijst je van de features:

- Hoge data snelheid 250kbps, 1Mbps en 2 Mbps
- Laag stroomverbruik van +- 11mA tot 14mA (1,9V tot 3,6V)
- Instelbare frequentieband (126 kanalen)
- Zes ontvang adressen met 1 tot 32 bytes buffers
- Zenden met ingebouwde handshake (Enhanced Shockburst Ack)
- Trage software SPI mogelijk
- Klein formaat (12mmx29mm en 16,7mmx20mm)
- Reiktwijdte buiten tot 70 meter, binnen 10m tot 15m
- Kleine kans op RF-botsingen door gebruik van korte bursts


De software

1) Software SPI voor noForth
2) Commando's om de interne registers te lezen en schrijven
3) Hogere besturings commando's voor nRF24L01
4) Zend- en ontvang commando's
5) Twee demo's 


Achtergrond bij nRF24L01

....


Problemen bij nRF24L01

....


Uitbreidingen software:

- Hardware SPI
- Verbeteren zend/ontvang routines
- Gebruik met meerdere modules in ster
- Gebruik met meerdere modules in ring
 


Works great, if you are using with arduino etc. 
Solder a 1uf to 10uf capacitor between the power and ground pins 
as it makes a big difference with signal quality. Thanks

1. The real GFSK monolithic transceiver chip
2. Built-in hardware and link layer
3. Automatic response and automatic retransmission function
4. Address and CRC check function
5. Wireless rate: 1 or 2 MBPS
6. SPI interface rate: 0 ~ 8MBPS
7. 125 optional channels work
8. Channel switching time is very short, can be used for frequency hopping
9. Fully compatible with nRF24XX series
10.I/O can accept 5v level of input
11.60ppm 16MHz crystal
12.Low working voltage: 1.9 ~ 3.6 V
13.The global open ISM frequency band, the maximum 0dbm transmitted power,
 free license to use. 14.Transmission distance up to 100 meters in outdoor 
 open occasions! 